LiteShower™ Portable, Wheelchair-Accessible Shower Stalls

The water pump used by all LiteShower models comes with a UL-listed 115VAC 3-prong GFCI adapter for electrical safety.

When a short occurs, GFCI will immediately shut off the power so you don't get the shock.

The power cord for the water pump needs to be plugged into the GFCI adapter, which then plugs into a power outlet.

GFCI has 2 buttons: TEST (power off) and RESET (power on). Press the TEST button on the GFCI. Pump should stop. Press the RESET button, pump will start again.

Important: GFCI will automatically reset. If you leave the GFCI plugged in, when a power outage happens but restores later, GFCI will RESET and start the pump. To prevent this from happening, always unplug the GFCI after the shower.